Group III 4cSt
Demand is on the rise for high-quality automotive lubricants due to tighter regulations on exhaust gas emissions worldwide.
Group III
Group III 4cSt
Demand is on the rise for high-quality automotive lubricants due to tighter regulations on exhaust gas emissions worldwide. Demand is also growing for industrial lubricants such as high viscosity index (HVI) hydraulic fluid. Produced from a two-stage hydrocracking process, Group III is a premium base oil that meets these demands.
Packaging Size
1L
4L
5L
20L
25L
208L
Descriptions
Demand is on the rise for high-quality automotive lubricants due to tighter regulations on exhaust gas emissions worldwide. Demand is also growing for industrial lubricants such as high viscosity index (HVI) hydraulic fluid. Produced from a two-stage hydrocracking process, Group III is a premium base oil that meets these demands.
Typical Properties
| TEST | METHOD | 4cSt | 6cSt | 8cSt |
|---|---|---|---|---|
| Kinematic Viscosity @ 212°F /100°C, cSt | ASTM D-445 | 4.0-4.5 | 5.6-6.2 | 7.6-8.2 |
| Kinematic Viscosity @ 104°F /40°C, cS | ASTM D-445 | report | report | report |
| Viscosity Index | ASTM D-2270 | min120 | min120 | min120 |
| SP. Gravity @15°C/ 60°F, g/cm 3 | ASTM D-4052 | report | report | report |
| Flash Point, °C | ASTM D-92 | min200 | min220 | min240 |
| Pour Point, °C | ASTM D-97 | max(-)12 | max(-)12 | max(-)12 |
| Color | ASTM D-1500 | maxL0.5 | maxL0.5 | maxL0.5 |
| Water, ppm | ASTM D-6304 | <60 | <60 | <60 |
| Acid Number, mgKOH/gm | ASTM D-664 | <0.05 | <0.05 | <0.05 |
| NOACK VOLATILITY, wt.% | ASTM D5800 | <18 | <8 | <7 |
| COLD CRANKING VISCOSITY, mPa.s | ASTM D5293 | <3500at(-)35℃ | <4000at(-)30℃ | <4500at(-)25℃ |