Briton BRAKE FLUID is heavy duty high boiling point brake fluid that is suitable for all conventional drum and disc brake system under arduous conditions. It may be used in hydraulic clutch-release systems. Care should be taken that Briton Brake Fluids should not be used in hydraulic systems for which mineral base fluids are specified.

Briton Brake fluid is only in its concentrated form out of a previously unopened or well-sealed container. Always seal the container immediately after use as the fluid absorbs moisture from the atmosphere quite rapidly; this will reduce service life significantly. Never reuse drained brake fluid. Brake fluid can affect the vehicle paintwork, so remove spills immediately without rubbing. Extended life and reliability of brake system components excessive thinning in severe high-temperature service or thickening at low starting temperatures. Dependable protection against rust and corrosion.

Product Description

Safety & Handling

Briton Brake Fluid is stable in ambient conditions, non-corrosive and it can be stored in mild steel containers.

Features & Benefits

  • Low vapor pressure and high boiling point.
  • Fluidity at low temperatures and excellent thermal stability.
  • Excellent chemicals stability and corrosion resistance.
  • Compatible with all system seals.


Properties Unit Typical Test Result
Boiling Point [min] °C 260
Kinematic Viscosity 20°C [mm2/s] 15-17
Solidifying Point °C <-70
Flash Point °C >125
Ignition Temperature °C >200
Density 20°C g/cm3 1.055-1.075

Packing Size: 250ML, 500ML, 1L

See also different:
  • Brake Fluid